Objetivo del cliente
Placeholder text. Hold the filler content steady without lowering the output of the line.
- Etapa verificada
- In Operation
- Fecha del proyecto
- 2024
- Aplicación principal
- Automotive and Appliance Mineral-Filled PP Compounding Line
- Identidad del cliente
- Anonymized
- Ubicación del proyecto
- Not disclosed in this demonstration record
The situation
Where this project started
A project is read from the conditions it began with — the profile, the background and the constraints are the customer's, and the result only means something beside them.
Perfil del cliente
Placeholder text. The profile below describes no real company: it is written to show where the customer description sits on the page. In a real case study this field carries the anonymised profile agreed with the customer.
A compounder running one extrusion line, producing filled polypropylene grades for injection moulders, with the plant in Europe.
Antecedentes del proyecto
Placeholder text. The line ran with the filler added at the extruder throat, and the filler content of the finished compound moved inside a batch.
Condiciones iniciales
Placeholder text. One extrusion line, manual loading of pellets and filler, no buffer between loading and extrusion, and roughly 12 m2 of free floor area with 4.5 m of headroom.
Limitaciones clave
Placeholder text. Production could not be stopped for more than the agreed window, and the existing line had to stay usable while the new section was installed.
Delivery
What was delivered, and why it was chosen
The scope below is what this project actually received; the configuration snapshot is the one agreed for this delivery, not a current product sheet.
Por qué esta selección
Placeholder text. A batch blender was chosen over continuous blending because the plant checks the grade per batch, and because the working volume could be confirmed from the measured bulk density of the filler.
Personalización específica del proyecto
Placeholder text. The discharge height was changed so the existing platform could be reused, and the control interface was matched to the line PLC.
Alcance entregado
-
1 set
Makes the blend that removed the drift seen at the extruder throat.
Discharge height adapted to the existing platform.
-
System Buffer bin with level indication Sized for one full batch1 set
Holds one batch between the blender and the feeder.
Includes the level sensor and the support frame.
-
Accessory Dosing lance for the coupling agent Lance and pump1 set
Adds the liquid component during blending.
The storage tank is on the customer's side.
-
Service Commissioning support One visit plus remote guidance1 visit
Checks the blend with the customer's own sampling method.
Fees confirmed for the project and the region.
Verification
How far the project is verified
A stage is written down only when there is evidence for it; a project that is running says so, and a project still in the factory does not claim more.
-
Factory Tested
Placeholder text. The blender was assembled and run without load before packing; the ribbon clearance and the discharge gate were checked.
-
Shipped
Placeholder text. Shipped in one wooden case, with the control panel travelling inside the case.
-
Installed
Placeholder text. Installed on the existing platform over two days, with the line stopped only while the new section was connected.
-
Commissioned
Placeholder text. Three batches were blended with the customer’s own components, and samples from the top and the bottom of each batch were taken by the customer.
-
In Operation Verified
Placeholder text. In operation since the commissioning week, on the shift pattern of the plant.
Results
What changed, and what backs it
Every result names its evidence. A number without the method and conditions behind it would not be a result worth quoting.
Filler content variation within a batch
1.8 0.6
% absolute (demonstration figures, not verified)
Placeholder figures. The filler content measured from the top to the bottom of a batch moved less than before, on the customer’s own samples.
Evidencia Photo or Video
Archivo de respaldo Placeholder attachment: replace with the real record or photograph.
Placeholder text. The plant kept the output of the line unchanged after the blending step was added.
Evidencia Customer Confirmation
Evidence
Pictures, videos and records
Only material the customer has cleared for publication is shown here.
-
Placeholder · 1200 × 900 px (4:3)（占位图） Replace with an approved photo of the installed section at the plant at this size.（按此尺寸替换为正式图片。） -
Placeholder · 1200 × 900 px (4:3)（占位图） Replace with an approved photo from the factory test or the installation at this size.（按此尺寸替换为正式图片。）
Vídeos del proyecto
Registros de prueba
Documentos
Details
Further details
- Soluciones relacionadas